FREE USA Shipping Over $150 and World Over $250 USD

How To Tell If Your Suit Lapel Is Handmade

Posted on September 16 2016

Ever wonder if your new suit was actually fully handmade? This is a common question that we get almost daily about our suiting selections. Truth be told, most of the suitings today that are " off the rack " or " ready made " are typically machine made. However, there are some telltale signs that show if a garment is handmade or not. One large difference between ready made and hand made is shown within the lapel roll. Below is a great insert from Parisian Gentlemen on the lapel specifics, how to care for  and how it's hand made. Enjoy! - TB

What is it about the bespoke tailored suit that spoils our taste for all the others?  Of course, the answer is a long list of impressive reasons ranging from the subtle but precise shoulder construction to a smooth back with no gape at the collar, to the ineffably charming ragged-at-the-back buttonholes, to working horn-buttons on the cuff, to those magical floating canvasses. Yet, one of foremost indicators to the eye that signals a bespoke suit is…the lapel roll.

In choosing your preferred lapel roll:

1) know the two main components of the lapel roll (belly and roll line) in order to choose the correct aesthetics,  and angle/dimensions to enhance your frame, and

2) compare the results of different tailors and settle on your favorite craftsmanship work.

THE LAPEL ROLL

Lapel Roll: The fall and curl of the lapel downwards from the break (fold) of the collar to the designated button.  The term ‘roll’ applies to a softer lapel finish.

COMPONENTS OF THE LAPEL ROLL

The main components of the lapel roll include the belly and the roll line. We also notice the result of the “hollow” on a finished lapel.

THE BELLY

The belly describes the lowest part of the turn of the lapel curve as seen below. Some tailors believe that a lot of belly is required to give the lapels the desired degree of upward angle.

As described by  (Sydney, Australia) on Style Forum, this is a British button-two/show-one coat (or the American version of a 3 roll 2, where only the middle button is buttoned), which has a fullness of lapel around the buttoning point because, as you can see, the belly begins at the middle button.

The 3 roll 2 is a favorite among gentlemen of substantial height (as a gentleman who is not tall should avoid too many buttons and pockets on a coat in order to avoid breaking the continuous vertical line of the suit) mainly for the reason that the third button plays a part in assisting the tailor to shape an elegant lapel belly roll. Such a roll is a clear signal of a hand-stitched lapel, for no machine-made or fused lapel is able to exhibit roll with this button in place (« Bespoke Tailoring » by Luxury Insider.)

The top button can be buttoned if an unsightly kink is present in the fabric caused by the top button remaining unbuttoned. Otherwise, to preserve a nice roll line of the lapel, leaving the top button unbuttoned is preferred to enhance the flow of the lapel roll from top to bottom.

THE ROLL LINE

The roll line is the imaginary line measured from the point that the lapel begins (collar section) to the point where the lapel ends (button area).

THE HOLLOW

The hollow of the lapel refers to the depth of the area underneath the fold curve.

The depth of the hollow of the lapel is a matter of personal taste and may vary according to the method of construction preferred by the customer and/or tailor.

HOW THE LAPEL ROLL IS MADE

Take a close look at this nice video on the making of a lapel roll, including preparing the padding and building the roll, by Raj Singh : Rolling the Lapel

CARE OF THE ROLLED LAPEL

As it is preferred that the tailor will provide cleaning and care of your custom suits, at times this option is not available. It is not uncommon for suit owners to be mortified to find that some dry cleaners have pressed custom lapels on coats “flat”,  after they come off the commercial press, literally obliterating the roll. If your tailor cannot care for your suit and you opt for a cleaning service, it is best to find a professional cleaner that provides a “sponge & press” service, which requires hand-pressing the garment according to its original shape. But, to play it safe, maintain your lapel roll at home. 

The following excerpt from the web series: Put This On goes into nice detail on the finer points of caring for the rolled lapel on a coat:

To regain the shape of the lapel, StyleForum veteran Sator recommends the following procedure (which can, in my experience, also be roughly replicated with a steamer):

Try lying the coat down with the lapel lying flat, wrong side (the underside of the lapels) upwards.

The collar should be standing up – as when you “pop” your collar.

Place a press cloth over the roll of the lapel, near the buttoning point. A tea towel might do the trick.

Lightly dampen the roll of the lapel.

Press over the roll line near the buttoning point, ensuring you always iron with the press cloth under the iron.

You may need to put a bit of downward force on it. In the tailoring workshop you would use a heavy iron but you might just have to use a strong arm.

You may need to repeat this again the next day, especially if a heavy duty laundry press has been used on your lapel roll line.

Notes: 

How the lapel is made 

Lapel Roll: The fall and curl of the lapel downwards from the break (fold) of the collar to the designated button.

Hollow: The hollow of the lapel refers to the depth of the area underneath the fold curve.

The roll line: is the imaginary line measured from the point that the lapel begins (collar section) to the point where the lapel ends (button area).

0 comments

Leave a comment

All blog comments are checked prior to publishing

GET THE BEST LOOKING NEWSLETTER ON THE PLANET

Learn About Gent Style, Top Designer SALES & NEW ARRIVALS !

My Cart

Subtotal: $ 0.00

Your cart is currently empty.